448kHz CET-RET RF Machine
This 448 kilohertz radio frequency machine is described by its frequency and its CET principle rather than by a parameter table, and this page follows that evidence. Radio frequency equipment in this class is often compared on frequency, power, and temperature control, but only the first of those three is published for this model. The page therefore explains the principle that is documented and leaves the other two open for inquiry.
The listed frequency is 448 kilohertz. The listed principle is capacitive electric transfer, abbreviated CET: radio frequency current is conducted through capacitive coupling, with an insulating film as the medium, the human body as the other plate, a return plate closing the circuit, and tissue resistance producing heat and a temperature rise. That description is reproduced here as the manufacturer's page description, not as a clinical conclusion, and the RET mode named in the source title is noted as a mode name only, without added parameters.
No power, energy, or temperature value is published for this model, so this page gives none. Do not fill that gap from another radio frequency model's table or from general knowledge about this frequency class. Before payment, confirm the output power range, the temperature control method, the electrode and applicator set included, the treatment modes available, and the training provided.
Buyers comparing radio frequency equipment should also read the RF equipment category page, which places this model alongside the fractional RF microneedling machine, and the guide comparing RF microneedling with vacuum RF, which keeps the documented parameters of each family separate. The distinction between a documented principle and a documented parameter set is the check that matters most on this page.
Specifications As Listed
| Frequency | 448kHz |
|---|---|
| Principle (as described on the source page) | Capacitive electric transfer (CET): RF current conducted through capacitive coupling, insulating film as medium, human body as the other plate, return plate closing the circuit, tissue resistance producing heat |
| Power / energy / temperature | Not published for this model; confirm at inquiry |
Description-level listing: no power, energy, or temperature parameter table is published for this model. No value has been added from another model or from general knowledge.
Before You Order
Before payment, confirm the following for your exact model and configuration:
- Confirm the full specification table, including any value marked as listed separately on this page.
- Ask for the certification documents that apply to your market. Certificates are available upon request.
- Confirm the MOQ, lead time, packaging, and shipping terms for your order quantity.
- Confirm the warranty scope, spare parts availability, and after-sales support channel.
Related Pages
Electrodes, Applicators, and Session Routine
For a 448 kilohertz machine, the applicator set is the first question after frequency, because the CET principle is delivered through electrodes and a return plate rather than through a single handpiece. Ask which electrodes and applicators are included, which are optional, how they are sized for different areas, and what consumables they need. The session routine is the second question: how a session is structured, how long it runs, and how the operator monitors the treatment, since no temperature or power table is published to answer those questions from the listing. Training should cover the CET principle as described on the source page, the placement of the return plate, and the safety checks for each session. As with the other description-level listings on this site, written answers to those questions are the specification, and they should be obtained before payment.